Fetherweight Interface Program. Standardized boards/interfaces/software building blocks simplify IoT This short video describes the installation of the Featherweight Interface Program used for graphing data from Featherweight Altimeter products.wFIP Setup @. This screen shot may not mean much to you yet, but it is the start of porting FIP over to Java so it is available on Windows/MAC/Linux
Handson Opera 11.50’s new “featherweight” interface packs a punch from arstechnica.com
One of the prior complications with the Mac WINE attempt was getting the USB/Serial to work. It is ideal for embedded systems, IoT devices, and other applications where performance and resource conservation are paramount.
Handson Opera 11.50’s new “featherweight” interface packs a punch
Featherweight Interface Program (FIP) The FIP makes it easy to download and display all the Raven, Raven2, Raven3 or Raven4 altimeter's recorded data, check out the altimeter, and configure the outputs Post-flight operation When the Raven is below 2000 feet above the launch pad, it watches for the barometric readings to become constant to detect landing The FET used for the deployment output is rated for 9 Amps for pulses < 5 seconds, and has an Rds(on) of about 20 mOhms
Beautycounter Tan 420 Skin Twin Featherweight Foundation Ulta Beauty. The FET used for the deployment output is rated for 9 Amps for pulses < 5 seconds, and has an Rds(on) of about 20 mOhms Time delay 2 sec 1.5 sec Burnout Counter These default output settings can easily be changed using the Featherweight Interface Program (FIP)
Handson Opera 11.50’s new “featherweight” interface packs a punch. Use the Featherweight Interface Program (FIP) available at www.featherweightaltimeters.com to customize output logic for your application Post-flight operation When the Raven is below 2000 feet above the launch pad, it watches for the barometric readings to become constant to detect landing